Technical datasheet
PC-ABS Gebablend 65 HI
Product description:
PC/ABS resins with very high charpy impact strength and charpy notched impact strength, Vicat B/50 = 120°C
Special Properties:
- available in all colors
- available as uv-stabilized resins
- available with enhanced mould release
- available easy flowing compound
Application
injection molded, technical components of different industries (automobile, electro- electronical, machine construction, sports)
| Typical values | Condition | Unit | Test method | Values |
|---|---|---|---|---|
| Rheological properties | ||||
| MVR | 260°C / 5 kg | cm³/10 min | ISO 1133 | 23 |
| Mechanical properties | ||||
| Charpy unnotched impact strength | 23 °C | kJ/m² | ISO 179/IeU | o.Br. |
| Charpy unnotched impact strength | -30 °C | kJ/m² | ISO 179/IeU | o.Br. |
| Charpy notched impact strength | 23 °C | kJ/m² | ISO 179/IeA | 45 |
| Charpy notched impact strength | -30 °C | kJ/m² | ISO 179/IeA | 35 |
| Tensile modulus | 1 mm / min | MPa | ISO 527-1 | 2.300 |
| Yield Stress | 50 mm / min | MPa | ISO 527-1 | 50 |
| Yield Strain | 50 mm / min | % | ISO 527-1 | 5,5 |
| Thermal properties | ||||
| Vicat Softening temperature | 50 °C / 50 N | °C | ISO 306 | 120 |
| Heat deflection temperature HDT A | 1,80 MPa | °C | ISO 75-2 | 102 |
| Heat deflection temperature HDT B | 0,45 MPa | °C | ISO 75-2 | 122 |
| Other properties | ||||
| Density | 23 °C | g/cm³ | ISO 1183 | 1,14 |
| Shrinkage | % | 0,45 - 0,8 | ||
Processing recommendations:
Drying
Drying temperature in °C: 80-100
Drying time (h) Dry air dryer: 2-4
- Residual moisture content max 0,05%
- When downtime of 4 hours, we recommend lowering the temperature of the dryer by 40°C
Processing recommendations
melt temperature: 250-280 °C
1. Zone: 240-260 °C
2. Zone: 250-270 °C
3. Zone: 250-280 °C
4. Nozzle: 250-280 °C
5. Mold: 70-100 °C
- Shrinkage according to Literature: 0,45% to 0,8% (depending on the part geometry and the process)
- Setting may be different depending on the part design and machine type of recommend values
Test Values
The stated values were - if not otherwise stated - taken on standardized test specimen at room ambient temperature. The specifications have to be regarded as guidance values, but not as binding minimum values. Please note that the properties can be considerably influenced by mould design, processing parameters and colouring.
Processing instructions
When processing on the basis of the recommended processing parameters, small quantities of dissociation products can emit. According to the safety data sheet, the workplace exposure limit has to be kept by means of adequate exhaustion and ventilation, in order not to affect the machine operators’ health and well-being. The compulsory processing temperatures must not be considerably exceeded, in order to avoid a stronger partial decomposition of the polymers and dissociation of volatile decomposition products.
Disclaimer
All information, documents and presentations published on this website are the exclusive property of geba. The permission of use is given with the reservation of the copyright being shown on all copies, the use being strictly personal and not exploited for business purposes, the information not being altered and all presentations of the website only being used together with the appendant texts. geba does not assume liability nor guarantee for any information, documents or presentations on the website. geba is not responsible for any damage of a nature whatsoever possibly resulting from a use or from the existence of this website along with the included information, documents and presentations. The user alone assumes full responsibility for all risks that might arise from his use of this website. With respect to the documents and information on the website, geba reserves all rights to make amendments at any time without prior announcement. The user is to the full extent responsible for all information he sends to geba with respect to its contents and correctness and the non-infringement of a third party’s rights.